Installation - Inflatable shapes and designs

Language

Our Email

zakaz@slon.net.ua

Schedule

from 9:00 to 20:00 without days off

Our address

Ukraine, Kiev, Lesya Kurbas avenue, 2-B

Our Email

zakaz@slon.net.ua

Schedule

from 9:00 to 20:00 without days off

Our address

Ukraine, Kiev, Lesya Kurbas avenue, 2-B

Setup of inflatables

High-quality mounting of inflatable construction is, probably, the most responsible and important step in its further operating. The proper installation of an inflatable figure has a direct impact on its service life, safety, and continuous maintenance. It is necessary to understand that the stability of the inflatable nearly always depends not only on the quality of materials but also on its appropriate fitting. Even though inflatable mounting initially seems to be easy, there is a number of details and nuances to consider.

Inflatable objects and pneumoconstructions  fitting types

Depending on size, a location of an inflatable object, options and ways of fastening of pneumoconstruction can differ in technical features. For instance, anchor fastenings, sandbags are used in the outdoor ground setup.

If the inflatable is going to be put on a roof, we recommend filling the base or foot compartments first with sandbags to ensure the inflatable will stay firmly attached, additionally, anchors, extensions for fixing to a floor and walls can be used.

Important aspects of setting procedures 

In the inflated position the construction has rather high wind profile due to its size. It is necessary to consider while choosing the area where the inflatable will be placed  If the inflatable object is set on the roof, it is necessary to pay particular attention to the reliability of fastening of pneumoconstruction and the power cable.

Due to practical experience, inflatable constructions with not really big surface area save its stability in strong wind. If pneumoconstruction is rather a volume, i.e. high wind profile, then the edge wind speed should not exceed 12 m/s. But, besides, at these calculations, it is necessary to consider the durability of fastenings and the size of the platform for setup.

How to set up an inflatable

In fact, you need to inflate construction, to put it in in the desired final base position and to tie the ropes on the different sides. But all this needs to be made properly.

It is essential not to tear, stain or blow the cover away during the inflation process. First, all fixing ropes must be evenly stretched so that the construction was in the required position.

Stakes should be placed at an angle for better anchorage and should be driven under the ground to prevent tripping.

As platforms for inflatables can be different, it is necessary to select and set up fixings accurately.

But the most important task is to install all attachments and ballasts supplied with the product in order to avoid extraction of the fixing components. How exactly to make it - it is in details described in the instruction which completed each product.

Please contact us via phone or submit an application form in order to get an inflatable setup.

Language



Наши телефоны
Our Email

zakaz@slon.net.ua

Schedule

from 9:00 to 20:00 without days off

Our address

Ukraine, Kiev, Lesya Kurbas avenue, 2-B